Product Details Brand the Autotype coloring force (%) 99 Suitable for Screen Production shelf life (months) 12 months Single weight (g) 1000g fluidity ≥ (mm) 0.2 Viscosity (S) 65 Scope: United Kingdom Autotype Ketu Tai sensitive adhesive: 7000,8000,2000,3000,6000,9000, Plus II. Ketu Tai sensitive adhesive: solvent, both water resistance, high sensitivity, high resolution, viaducts, good solvent resistance and softness of the omentum, excellent printability, excellent screen Tuomo renewable . Suitable for PCB, advertising signs, ceramic transfer paper, outlets and high-precision screen printing screen, high resistance to printing lines and sharp edges. the plus2000 is a fast exposure emulsions, suitable for all solvent-based inks and uv-curable inks. Features: High printing quality, solid content 34%, rapid exposure good coating appearance plus6000 the fabric printing sensitive adhesive, reliable performance, can achieve the best print quality and anti-Indian forces. Characteristics: high printing quality, solid content 44% Premium rate of printing durability, good the coating appearance plus7000 applicable to water-based and solvent-based two inks. Features: High printing quality, solid content 34%, exceptional pressrun rate, good coating appearance, wide range of applications plus8000 the quality sensitive adhesive which is suitable for any use. Features: High printing quality, solid content 38%, exceptional pressrun rate, good coating appearance, wide range of applications plus9000 contains a quick rinse of the single-component photopolymer, suitable for use in large production of plastic ink printing . Features: High printing quality, quick rinse, the solid content of 47%, exceptional anti-Indian rate good coating appearance plusiiclassic the original sensitive adhesive for a high quality water and solvent. Features: high print quality, solid content 34%, exceptional pressrun rate, good coating appearance, wide range of applications. Described in detail: the Autotype Ketu Tai sensitive adhesive has a high resolution, pollution-free diazonium salts sensitive adhesive has excellent plate performance, various types of light-sensitive adhesive has good features and performance. 1, the light-sensitive adhesive-to-plate process: net processing → drying → → drying glue (35 ° C -40 ° C) → → exposure → developing → drying → Revised Edition of censorship, the specific operation and precautions (1) with sensitive adhesive, the light-sensitive powder added directly to the latex slurry, slow stirring evenly. 2, the bubbles escape stirring for 4-6 hours before use. (2) screen pre-pre-treatment, roughening new polyester with a brush dipped mill in the wire-line network cream (Autoprep) in a circular motion, the mesh to achieve uniform roughening. Degreased new or used polyester, nylon, stainless steel mesh before use degreasing agent (Universal Meshprer) fully skimmed, with coarsening. (3) the coated photosensitive oil coating, screen tilt angle of 80-85 degrees. Quality sizing press law coating: 1, after the printing surface on each surface of the ink scratch two times, <40 ℃ dried, and then each scratch again, and then by <40 ℃ drying, these coatings have been able to meet the requirements of the secondary screen mesh. For thicker wire, or need thick film layer halftone printing surface after drying to increase the frequency of scraping the coating. 3, the screen is dry, the ink surface should be facing up, drying temperature <40 ° C. Sexy light plastic water production silk screen, lithography, dry, check the screen no problem to even coating on both sides of the screen with WR the Hardener (WR hardener) ,10-15 minutes after the wash with water , dried and put into use. Curing agent (hardener) screen can not stripping, screen can not be reused.